Return to previous page
EDM Wire & Accessories
EDM wire Features:
Very good straightness, excellent in auto threading applications, especially in Japanese and German wire cutting machines
Inline Japanese Continuous Annealing Technology ensures a stable and uniform tensile strength preventing wire breakage.
Manufactured with a high precision of wire diameter tolerance of +0.000 / -0.002 mm with smooth surface free from flaws or irregularities
Excellent Surface Finish
Good Roundness
Higher Cutting efficiency
-
Specifications -
Spool Sizes -
Process Type and Recommended Wire Grade
| Sr. No | Wire Diameter (mm) |
Diameter Tolerance (mm) |
Wire Grade | Tensile Strength (N/mm 2) |
Elongation (%) |
Available Spool Types | |
| 1 | 0.10 | + 0 , – 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax | |
| 2 | 0.15 | + 0 , – 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax | |
| 3 | 0.20 | + 0 , – 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax | |
| 4 | 0.25 | + 0 , – 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax | |
| 5 | 0.30 | + 0 , – 0.002 | Soft Semi Hard Hard |
450-550 550-750 >980 |
>25 > 10 ≤ 3 |
P5, DIN 125, DIN 160, Japax |
ALLOY CODE: A1 – CuZn40, A2 – CuZn37, A3 – CuZn35
| Spool Type | (D) mm | (d) mm | (L) mm | (W) mm | (H) mm | Net Wt / Spool (kg) | |
| DIN 125 | 125 | 80 | 125 | 100 | 16 | 3.5 | |
| DIN 160 | 160 | 100 | 160 | 130 | 22 | 7 | |
| DIN 200 | 200 | 125 | 200 | 160 | 22 | 10 | |
| DIN 250 | 250 | 160 | 200 | 160 | 22 | 20 | |
| P – 5 | 160 | 90 | 115 | 90 | 20 | 5 | |
| P – 10 | 200 | 90 | 134 | 110 | 30 | 10 | |
| P – 15 | 250 | 110 | 140 | 110 | 32 | 20 | |
| Japax | 130 | 60 | 36 | 28 | 12.5 | 1.5 |
Note: These spool dimensions are provided as general information, and are typical dimensions only. Spool manufacturers are not completely consistent with these dimensions.
| Process Type | Wire Type | ||||
| Soft | Semi Hard | Hard | |||
| Straight cutting | 1 Pass Cutting | Not recommended | Good | Excellent | |
| Straight cutting | 2 Pass Cutting (Rough +Finish) |
Not recommended | Not recommended | Excellent | |
| Straight cutting | 3 Pass Cutting (Rough +Finish + Refinish) |
Not recommended | Not recommended | Excellent | |
| Relief Cutting | 1 Pass Cutting relief under 10° | Not recommended | Good | Excellent | |
| Relief Cutting | 1 Pass Cutting relief under 10° to 20° | Good | Excellent | Not recommended | |
| Relief Cutting | 1 Pass Cutting relief over 20° | Excellent | Good | Not recommended |
ORDER AND INQUIERY
Call on : +91 -0241-2428008 | Email on : hjassociate@gmail.com
